Mechanical Torque Limiters, backlash-free Torque Limiting Clutch, Safety Couplings by R+W

SK TORQUE LIMITERS MODEL SK | 0.1 - 160,000 NM

INDIRECT DRIVES	DIRECT DRIVES TORSIONALLY RIGID	DIRECT DRIVES ELASTIC

SK1 0.1 - 2,800 Nm with conical clamp connection	SK2 0.1 - 1,800 Nm with clamping hubs	ES2 2 - 900 Nm with clamping hubs

SKP 0.1 - 2,800 Nm with keyway connection	SK3 5 - 2,800 Nm with tapered clamp connection	ESL 1 - 200 Nm Economy Class

ST1 1,000 - 160,000 Nm with keyway connection	SK5 0,1 - 850 Nm press-fit version, with clamping hub

Further Information about mechanical Torque Limiters and Safety Couplings from R+W.

Available disengagement modes for R+W Torque Limiters, Torque Limiting Clutches, Safety Couplings:
Single-position | Multi-position | Load holding | Full disengagement

Click here for mounting instructions for our torque limiters and safety couplings!

Torque Limiting Couplings / Torque Limiters - compact and backlash-free! << Download>>

Click here to show the press release about these Safety Couplings and mechanical Torque Limiters

Torque Limiters SK

Bellows
Couplings BK

Miniature
Couplings MK

Elastomer / Jaw
Couplings EK

Linear
Couplings LK

Torque Limiters with press-fit design

With clamping hub for direct drives 0,1 - 1.800 Nm
	Easy assembly Low moment of inertia Compact Compensates for shaft misalignment Adjustable settings

With conical clamp or clamping hub for indirect drives 0,1 - 2.800 Nm
	Integral bearings for timing belt pulley or sprocket Compact, simple design Adjustable settings

With conical clamp or clamping hub for indirect drives 0,1 - 2.800 Nm
	Integral bearings for timing belt pulley or sprocket Compact, simple design Adjustable settings

With conical clamp connection for direct drives 5 - 2.800 Nm
	High clamping forces High degree of operational dependability Compensates for shaft misalignment Adjustable settings

With clamping hub, press-fit version for direct drives 0,1 - 850 Nm
	Easy mounting and dismounting Electrically and thermally insulated Compensates for shaft misalignment Adjustable settings

torque limiter „Economy Class“ 1 - 200 Nm
	low price compact multi-position

With clamping hub, press-fit version for direct drives 2 - 900 Nm
	Easy assembly Damps vibrations Compensates for shaft misalignment Adjustable settings

Torque Limiter for indirect drives 1.000 - 160.000 Nm
	Compact, simple design Precise overload protection Torsionally rigid Integral bearings for timing belt, pulley or sprocket

mit Passfederverbindung für direkte Antriebe von 1.000 - 160.000 Nm
	torsionssteif Ausgleich von Fluchtungsfehlern exakte Drehmomentbegrenzung

mit Passfederverbindung für direkte Antriebe von 1.000 - 160.000 Nm
	schwingungsdämpfend Ausgleich von Fluchtungsfehlern exakte Drehmomentbegrenzung