Line Shafts ZA
Please select a Line Shaft:
Line Shaft Model ZA
with tapered conical sleeves from 1,500 – 4,000 Nm
- Mounting + dismounting without moving the
aligned drive elements
- Standard lengths up to 3 m (9.84 ft.)
- No pillow block bearing required
Design:
With tapered conical sleeves and captive jack screws.
Intermediate tube section supported by gimbals
within the bellows.
Lateral mounting and dismounting accomplished
through the the removal of the intermediate
tube section.
Temperature range:
-30 to +120° C (3.6 F to 270)
Backlash:
Absolutely backlash-free.
|
Service life:
R+W Line Shafts are maintenance-free and have an infinite life,
if the technical ratings are not exceeded.
Fit tolerance:
On the hub/shaft connection 0.01 to 0.05 mm.
Material:
Bellows made of flexible stainless steel.
Intermediate tube section: steel.
Optional composite CFK tube for high speeds.
Clamping hubs: steel.
Non-standard application:
Custom designs with varied tolerances, keyways, non-standard material and bellows are available upon request.
Technical Data:
- rated torque from 1,500 - 4,000 Nm
- shaft diameter from 35 - 100 mm
|
 |
|
Properties of Line Shafts Model ZA:
- Compensation for misalignments
- Backlash-free and torsionally rigid
- Able to span longer distances
- Standard lengths up to 6 m (19.68
ft)
- No intermediate support bearing required
- Intermediate tube removable for convenient mounting
|
|
Possible applications for Line Shafts ZA:
|
