Rigid Bellows Couplings BK - flexible Shaft Couplings
Torsionally rigid BELLOWS COUPLINGS from R+W
High-Precision Bellows Coupling Series BK 5 now up to 1.500 Nm
Taking
up the challenge for greater technical demands in modern machine design
and construction, R+W has further increased the torque of the unique
BK5 series of Bellow Couplings.
This coupling features a unique keyed tapered hub design allowing it to be quickly mounted and dismounted. When the two coupling halves are properly pretensioned this coupling is torsionally rigid with zero backlash. The stainless steel bellow compensates for axial, angular, and lateral misalignment simultaneously making this one of the most versitle couplings on the market.
Conventional hub designs incorporate a tightening screw requiring the
assembler to access the coupling through a hole in a flange in order to
assemble it to a shaft. Often in a break-down maintenance situation the
tightening screw does not line up with the flange access hole making nearly
impossible to disassemble the coupling from the drive shaft. The BK5 is
the perfect solution in this situation. The bellow also isolates the
shaft bearings of the drive and driven elements from any
side loading due to misalignment, thus extending their service life.
These torsionally rigid, low moment of inertia, couplings are specifically suited for high dynamic servo applications like NC and CNC machine tools, robotic drives, linear actuators, etc.
The shaft hubs are custom bored on each side for shaft sizes from 8 to 80 mm ( 0.3 to 3.15 in.) with or without keyways.
Sizes are available for torque capacities ranging from 15 to 1500Nm (133 to 13,275 in. lbs.).
R+W Shaft Couplings with metal Bellows and a high torsional stiffness.
Download this document about the Shaft Couplings / Bellows Couplings BK5 as: Word.doc or Adobe.PDF
Click here for mounting instructions for our Metal Bellows Couplings - please click here !
